replace PHE Spare Gasket for Funke FP10

Gasketed Plate Heat Exchanger, Plate Heat Exchanger, Plate Heat Exchangers replace PHE Spare Gasket For Funke FP10

PHE plates/gaskets are non-OEM, 100% compatible with genuine parts.

All PHE Gaskets and Plates are produced under approved production conditions, and both Rubber compounds and Plate material are analyzed on a third-party lab. Entrance material-control for Plates and gaskets is made at our own lab, to ensure compliance with certificates.

The plate heat exchanger has a compact structure, with a heat exchange area per unit volume that is 2-5 times that of the shell and tube type, and does not require a reserved maintenance space for extracting tube bundles, thus achieving the same heat exchange. The plate heat exchanger covers an area of approximately 1/5-1/8 of the shell and tube type heat exchanger.

d. Easy to change heat exchange area or process combination;

As long as a few plates are added or reduced, the purpose of increasing or reducing the heat exchange area can be achieved; Changing the arrangement of plates or replacing a few plates can achieve the required process combination and adapt to new heat exchange conditions, while the heat transfer area of shell and tube heat exchangers is almost impossible to increase.

e. Lightweight;

The plate thickness of a plate heat exchanger is only 0.4-0.8mm, while the thickness of the heat exchange tube of a shell and tube heat exchanger is 2.0-2.5mm. The shell and tube type shell is much heavier than the frame of a plate heat exchanger, and the plate heat exchanger is generally only about 1/5 of the weight of the shell and tube type.