replace PHE Spare Gasket for Funke FP08

Gasketed Plate Heat Exchanger, Plate Heat Exchanger, Plate Heat Exchangers replace PHE Spare Gasket For Funke FP08

PHE plates/gaskets are non-OEM, 100% compatible with genuine parts.

All PHE Gaskets and Plates are produced under approved production conditions, and both Rubber compounds and Plate material are analyzed on a third-party lab. Entrance material-control for Plates and gaskets is made at our own lab, to ensure compliance with certificates.

Using the same material and with the same heat exchange area, the price of plate heat exchangers is about 40%~60% lower than that of shell and tube heat exchangers.

g. Convenient production;

The heat transfer plate of the plate heat exchanger is processed by stamping, with a high degree of standardization and can be produced in large quantities. Shell and tube heat exchangers are generally made by hand.

h. Easy to clean;

The frame type plate heat exchanger can loosen the plate bundle and remove the plates for mechanical cleaning as long as the compression bolts are loosened, which is very convenient for the heat exchange process that requires frequent cleaning of the equipment.

i. Low heat loss;

The plate heat exchanger only exposes the outer shell of the heat transfer plate to the atmosphere, so the heat dissipation loss can be ignored and insulation measures are not required. However, shell and tube heat exchangers have high heat loss and require an insulation layer.