replace BARRIQUAND phe gasket UFX18

Gasketed Plate Heat Exchanger, Plate Heat Exchanger, Plate Heat Exchangers PHE plates/gaskets are non-OEM, 100% compatible with genuine parts.

All PHE Gaskets and Plates are produced under approved production conditions, and both Rubber compounds and Plate material are analyzed on a third-party lab. Entrance material-control for Plates and gaskets is made at our own lab, to ensure compliance with certificates.

HNBR can vary in performance over a wide range through formula adjustment. Its typical properties are shown in Table 2, with higher tensile strength than CR and NBR, and ZSC even reaching the level of PU; HNBR has excellent heat resistance to air aging and is related to its saturation. The higher the saturation, the better the heat resistance. HNBR at 150 ℃ × Under the aging condition of 42 days, the elongation at break remains at 50%, and the tensile strength actually remains unchanged, while the hardness (Shore A) only increases by 11 °. Especially, unlike other rubbers, temperature has little effect on the hardness and modulus of NHBR, which is very important. Automotive synchronous belts require that the shape of the belt should be maintained under initial tension within a certain temperature and speed range to prevent time lag between the belt and the pulley. The long-term dynamic performance of HNBR is stable, and experiments have shown that when the given service life is 1000 hours, the service temperature of each oil resistant rubber is shown in Table 3