Repalce heat exchanger gasket alfa laval m10

Gasketed Plate Heat Exchanger, Plate Heat Exchanger, Plate Heat Exchangers PHE plates/gaskets are non-OEM, 100% compatible with genuine parts.

All PHE Gaskets and Plates are produced under approved production conditions, and both Rubber compounds and Plate material are analyzed on a third-party lab. Entrance material-control for Plates and gaskets is made at our own lab, to ensure compliance with certificates.

The sealing gasket of a plate heat exchanger is an important component of the heat exchanger, and the application range and lifespan of the plate heat exchanger are also limited to some extent by the sealing gasket. If there are problems with the use of gaskets, the plate heat exchanger will not function properly. The sealing gasket of a plate heat exchanger can not only seal the medium inside the heat exchanger, prevent external leakage of the medium, but also prevent the connection between heat exchange media. Therefore, when the gasket of a plate heat exchanger has problems such as leakage, aging, fracture, hardening, etc., it needs to be replaced in a timely manner using the correct method. Improper operation can cause leakage in the heat exchanger. So, let's learn about the replacement steps and precautions of the sealing gasket of a plate heat exchanger together! 1. Change the order of the sealing gasket of the plate heat exchanger. 1) Remove the waste gasket and be careful not to damage the sealing gasket groove during disassembly. 2) Use methyl ethyl ketone or other ketone solvents to remove adhesive residue from the gasket groove. 3) Clean the gasket groove and gasket with a clean cloth or rag. 4) Apply the adhesive evenly to the gasket groove. 5) Paste clean new gaskets onto the plate. 6) The pad with gasket should be placed in a flat, cool, and well ventilated place and naturally dried before installation and use.